Ph.D (2007) Department of Mechanical and Control Engineering, Tokyo Institute of Technology, Japan

M.Engineering (2001) Department of Industrial and Production Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh

B.Sc. Engineering (1997) Department of Mechanical Engineering, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh

Postgraduate:

• Operations Management
• Production Management
• Inventory Management
• Production System Analysis
• Project Management
• E-commerce & International Trade
• IT for Business
• Control Engineering
• Maintenance and Safety Management

• Introduction to IPE
• Engineering Economy
• Industrial Management
• Business Communication
• CAD/CAM
• Computer Integrated Manufacturing
• Machine Tools
• Manufacturing Process
• Materials Handling and Maintenance Management
• Engineering Graphics 
• Product Design 
• Programming Language (C/C++)

• "Organizational and human factors related challenges to ISO 20000: Implications for environmental sustainability and circular economy", International Journal of Manpower, Vol. 41 No. 7 (Nov 2020) pp. 987-1004 . https://doi.org/10.1108/IJM-08-2019-0374
• “Improvement of overall equipment efficiency of ring frame through total productive maintenance: a textile case”, International Journal of Advanced Manufacturing Technology, Vol- 94 (2018), pp. 239–256, Springer International Publishing AG, https://doi.org/10.1007/s00170-017-0783-2
• “An application of Pareto analysis and cause-and-effect diagram (CED) to examine stoppage losses: a textile case from Bangladesh”, The Journal of The Textile Institute Vol. 108 No. 11 (Mar 2017), pp. 2013-2020, https://doi.org/10.1080/00405000.2017.1308786
• “A Framework for Application of Reliability Centered Maintenance in the Lead Oxide Production System”, Applied Mechanics and Materials, Vol.-860 (Dec 2016) pp.123-128, Trans Tech Publications Ltd, Switzerland, https://doi.org/10.4028/www.scientific.net/AMM.860.123
• “A Neuro-fuzzy Approach to Select Cutting Parameters for Commercial Die Manufacturing”, Procedia Engineering, Elsevier B.V., Vol.-90, pp. 753-759 (Dec 2014), https://doi.org/10.1016/j.proeng.2014.11.809
• “Surface roughness prediction modelling for commercial dies using ANFIS, ANN and RSM”, International Journal of Industrial and Systems Engineering, Vol.16 No.-2 (Jan 2014), Inderscience Enterprises Ltd, Switzerland, https://doi.org/10.1504/IJISE.2014.058834
• “Artificial Intelligence Based Surface Roughness Prediction Modeling for Three Dimensional End Milling”, International Journal of Advanced Science and Technology, Vol.-45, pp. 1-18 (2012), 
• “Machining parameter optimization by genetic algorithm and artificial neural network”, International Journal of Data Analysis Techniques and Strategies, Inderscience Enterprises Ltd, Switzerland, Vol. 6, No. 3 (2014), https://doi.org/10.1504/IJDATS.2014.063061
• "Optimization of Multipass Turning Parameters by Genetic Algorithm", Advanced Material Research, Vols.264-265 (2011), pp.1545-1550, https://doi.org/10.4028/www.scientific.net/AMR.264-265.1545
• “Surface Roughness Prediction Model for Ball End Milling Operation Using Artificial Intelligence”, Journal of Management Science and Engineering, Vol. 6, No. 2(2012), pp.41-54, http://dx.doi.org/10.3968/j.mse.1913035X20120602.2933
• “Surface Roughness Prediction Modeling for AISI 4340 after Ball End Mill Operation using Artificial Intelligence”, International Journal of Scientific & Engineering Research, Volume 3, No. 5 (May 2012) 
• “Crashing Axiom Artis Installation Project By Linear Programming”, Bangladesh Research Publication Journal, Vol.6, No.4 (2012), pp.356-362
• “An Application of Pareto Analysis and Cause -and –Effect Diagram (CED) for Minimizing Rejection of Raw Materials in Lamp Production Process”, Journal of Management Science and Engineering, Vol.5, No.3 (2011), pp.87-95
• “Adaptive Neuro-Fuzzy Inference System (ANFIS) Based Surface Roughness Prediction Model For Ball End Milling Operation”, Journal of Mechanical Engineering Research, Vol. 4(3), pp. 112-129 (2012)
• "Designing Solar Three-Wheeler for Disable People", International Journal of Scientific & Engineering Research, Vol. 3, No.1, (2012)
• “Fuzzy Based Inventory Management System”, Bangladesh Research Publication Journal, Vol.7, No.1 (2012), pp.55-59
• “Artificial Intelligence Based Surface Roughness Prediction Modeling for Three Dimensional End Milling”, International Journal of Advanced Science and Technology, Vol.12, (2012)
• “Study the Impact of Fatigue and Optimizing Productivity of an Assembly Line of Garment Industry”, International Journal of Scientific & Engineering Research, Vol.2, No.11 (2011), pp.1-8
• “Green Design Principles and Trends of Using Them Among Bangladeshi Consumer Goods Manufacturers”, Proceedings of the 2011 IEEM, (2011) pp.467-471, Singapore, 2011
• “An Application of Pareto Analysis and Cause-and-Effect Diagram (CED) for Minimizing Rejection of Raw Materials in Lamp Production Process”, Management Science and Engineering, Vol. 5, No. 3, (2011), pp.87-95, DOI:10.3968/j.mse.1913035X20110503.320
• “Optimization of Multipass Turning Parameters by Genetic Algorithm”, Advanced Materials Research 264-265:1545-1550 (2011), Vol. 5, No. 3 (2011), DOI: 10.4028/www.scientific.net/AMR.264-265.1545
• “Analysis of Critical Success Factors of Enterprise Resource Planning Implementation in Bangladesh”, Journal of Business Administration, Vol. 36, No. 1& 2 (2010), IBA, Dhaka University.
• “Present status and critical success factors of e-Commerce in Bangladesh”, Proceedings 0f 12th International Conference on Computers and Information Technology, 2009, DOI: 10.1109/ICCIT.2009.5407313
• “Feature Map Building Based on Shape Similarity for Home Robot ApriAttenda”, ROBIO 06, 2006 IEEE International Conference on Robotics and Biomimetics, 2006, DOI: 10.1109/ROBIO.2006.340370
• “Optimization of Multipass Turning Parameters by GA-ANN based Hybrid Approach”, Proceedings of International Conference on Leading Edge Manufacturing in 21st century: LEM21, (2007), https://doi.org/10.1299/jsmelem.2007.4.9C338
• “Experimental Analysis and Optimization of Cutting Parameters for End Milling Aluminium Alloy”, Towards Synthesis of Micro-/Nano-systems. Springer, London. https://doi.org/10.1007/1-84628-559-3_70
• “Map Building and Localization of Home Robot using Feature Matching and Monte Carlo Approach”, The Proceedings of JSME Annual Conference on Robotics and Mechatronics (Robomec), 1A1-E32, (2006), DOI: 10.1299/jsmermd.2006._1A1-E32_1
• “Cutting Parameters Optimization and Constraints Investigation for Turning Process by GA with Self-Organizing Adaptive Penalty Strategy”, JSME International Journal Series C (2006) Vol. 49 No. 2, pp.293-300, DOI: 10.1299/jsmec.49.293
• “Self-localization of home robot ApriAttenda™ based on Monte Carlo approach”, PCAR '06: Proceedings of the 2006 international symposium on Practical cognitive agents and robots, (2006) pp.212–220, Perth, Australia, https://doi.org/10.1145/1232425.1232452
• “Optimization of Cutting Parameters For End Milling Operation By SOAP Based Genetic Algorithm”, Proceedings of the International Conference on Mechanical Engineering 2005(ICME2005) (2005), Dhaka, Bangladesh
• “Investigation of the Constraints for Optimization of Turning Process by GA with Self-Organizing Adaptive Penalty Strategy”, Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century, Nagoya, Japan, (2005) pp.319-324 https://doi.org/10.1299/jsmelem.2005.2.319
• “Optimization of Turning Process Parameters by Genetic Algorithm (GA) Considering the Effect of Tool Wear”, The Proceedings of The Manufacturing & Machine Tool Conference, 2004, pp. 305-306, https://doi.org/10.1299/jsmemmt.2004.5.305
• “Artificial Neural Network Based Process Selection For Cylindrical Surface Machining”, Proceeding of the International Conference on Manufacturing, ICM 2002, Volume:VII pp.321-326, (2002), Dhaka, Bangladesh
• “Manufacturing Feature Recognition of Parts using DXF files”, Proceedings of 4th International Conference on Mechanical Engineering, pp.VI 111-115, (2001), Dhaka, Bangladesh
• “Current Trend in Computer Aided Process Planning”, Proceedings of the 7th Annual Paper Meet and 2nd International Conference, IEB, Bangladesh, Mechanical Engineering Division, (2001), pp. 81-92, Dhaka, Bangladesh
• “Optimization Of Process Planning Parameters For Rotational Components By Genetic Algorithms”, Proceedings of 4th International Conference on Mechanical Engineering, pp.VII 227-233, (2001), Dhaka, Bangladesh