Academic Programs
 
Contact Us
 
Notice/Links

 

 

 

 

Research

The research activity in the Department of IPE is concerned with the design and operation of Automated Systems, Planning, Design and Operation of Production Facility, Quality control and assurance, Production Planning and Optimization, Advanced Manufacturing & Machining Operation Modeling and Material Science & Engineering. Active research is performed in arena of Nano composite and Molecular Dynamics, Inventory Management , Supply Chain Management, Machining parameter Otimization, Manufacturing Systems Modeling and Simulation, Process Development & Modeling and Computer Aided Process Planing. Publications in reputed journal/conference proceedings are listed below.

 
Selected Publications

2016

Ali, S.M. & Nakade, K. “Optimal ordering policies in a multi-sourcing supply chain with supply and demand disruptions-a CVaR approach”, International Journal of Logistics Systems and Management. Accepted Manuscript. 2016.

Ali, S.M., & Nakade, K., “Coordinating a supply chain system for production, pricing, and service strategies with disruptions”. International Journal of Advanced Operations Management, vol. 8, no. 1, pp. 17-37, 2016.

Zaman, K and Mahadevan, S, Reliability-based Design Optimization of Multidisciplinary System under Aleatory and Epistemic Uncertainty, Structural and Multidisciplinary Optimization, 2016, available online.

Zaman, K and Saha, S, An Efficient Methodology for Robust Assignment Problem, International Journal of Operational Research, 2016. (In production).

2015

Ali, S.M., & Nakade, K. A., “A mathematical optimization approach to supply chain disruptions management considering disruptions to suppliers and distribution centers”. Operations and Supply Chain Management: An International Journal, vol. 8, no.2, pp. 57–66, 2015.

Nakade, K., Ito, A., & Ali, S.M., “U-shaped assembly line balancing with temporary workers”, International Journal of Industrial Engineering, Theory, Applications and Practice, vol. 21, no.6, pp. 134-146, 2015.

Dey, P R, and Zaman, K,  An Efficient Approach for Robustness-based Design Optimization under Interval Uncertainty, In Proceedings of the Third International Conference on Advances in Mechanical, Aeronautical and Production Techniques (MAPT 2015),  11-12 April, 2015, Kuala Lumpur, Malaysia.

Ali, S.M., & Nakade, K., "Price and service competition of a supply chain system under real-time demand disruptions", Proceedings of International Symposium 2015 on Scheduling, Japan, 99-104.

Ahmad, N., Aahsan-Ul-Karim, M., A Framework for Application of  Reliability Centered Maintenance in the Lead Oxide Production System, International Conference on Material Science and Manufacturing Engineering, Dhaka, December 2015.

2014

Zaman, K, and Kritee, S, An Optimization-based Approach to Calculate Confidence Interval on Mean Value with Interval Data, Journal of Optimization, vol. 2014, Article ID 768932, 8 pages, 2014.

Ahmad, N., Tanaka, T., & Saito, Y. (2014). Machining parameter optimisation by genetic algorithm and artificial neural network. International Journal of Data Analysis Techniques and Strategies, 6(3), 261-274.

Ali, S.M., & Nakade, K., “Scenario-based supply chain disruptions management framework-a quantitative approach”. Innovation and Supply Chain Management, vol. 8, no. 3, pp. 81–91, 2014.

Hossain, M. S. J., & Ahmad, N. (2014). A neuro-fuzzy approach to select cutting parameters for commercial die manufacturing. Procedia Engineering, 90, 753-759.

F. Sarwar, M. Rashid, An Adaptive  Neuro- Fuzzy Inference System based Algorithm for Long Term Demand  Forecasting of Natural Gas Consumption, Fourth International Conference on Industrial Engineering and Operations Management (IEOM),   Bali, Indonesia, Jan 7-9, 2014.

F. Sarwar, A.K.M Khalid, R. Rashid and M. Ahmed, Determination of Optimum Parameter Settings for Stem Processing in Tobacco Processing using Taguchi Method, 4th International Conference on Mechanical Engineering, Institute of Engineers Bangladesh.

2013

McDonald, M., Zaman, K., and Mahadevan, S., Probabilistic Analysis with Sparse Data, AIAA Journal, Volume 51, Issue 2, 2013, pp. 281-290.

Zaman, K, and Mahadevan, S, Robustness-based Design Optimization of Multidisciplinary System under Epistemic Uncertainty, AIAA Journal, Volume 51, Issue 5, 2013, pp. 1021-1031. 

Zaman, K, McDonald, M, and Mahadevan, S, Inclusion of Correlation Effects in Model Prediction under Data Uncertainty, Probabilistic Engineering Mechanics, Volume 34, 2013, pp. 58-66.

Moin C., Sarwar F. and Doulah A.B.M.S., “Investigation of a Hybrid Production System for Mass-Customization Apparel Manufacturing”, Journal of Textile, Apparel, Technology and Management, vol.8 (3), 2013.

Ahmed I., Sultana I., Paul S.K. and Azeem A., “Performance Evaluation: A Fuzzy Approach”, International Journal of Productivity and Performance Management (Emerald) Vol: 62, No. 7, pp: 718-734, 2013.

C. Moin, F. Sarwar, A.B.M.S. Doulah, Investigation of a Hybrid Production System for Mass-Customization Apparel Manufacturing. Journal of Textile, Apparel, Technology and Management, vol.8 (3), 2013

Parveen S. and Saha S.K., “GA A -based fuzzy optimal model for time-cost trade-off in a project with resources consideration”, Int. J. Industrial and Systems Engineering, Vol. 15, No. 2, pp-153-170, 2013.

Zaman, K, and Khan, S, Construction of Confidence Interval on Mean value with Interval Data, IEEE Symposium Series on Computational Intelligence, 16-19 April, 2013, Singapore.

2012

Ali, S., Alam, M.I., & Bhowmick, S., “Organizational design in the context of supply chain sustainability: A conceptual model”. Management Science Letters, vol.2, no.4, pp. 1141-1154, 2012.

Allama, M.M., Parvez, M.S., Ali, S.M., & Azeem, A., " An analytical hierarchy process for prioritizing the safety management elements for a manufacturing organization in Bangladesh", International Journal of the Analytic Hierarchy Process, vol. 4, no. 2, pp. 105-117, 2012.

Mamun, A.A., Khaled, A.A., Ali, S.M., & Chowdhury, M.M., “A Heuristic approach for balancing mixed-model assembly line of Type-I using Genetic Algorithm”, International Journal of Production Research、 vol. 50, no.  18, pp. 5106-5116, 2012.

Bhattacharjee, B., Azeem, A., Ali, S.M., & Paul, S.K., “Development of a CNC interpolation Scheme for CNC controller based on Runge-Kutta method”, International Journal of Computer Aided Engineering and Technology, vol. 4, no., 5, pp. 445 – 464, 2012.

Bhattacharjee B., Azeem A., Ali. S. M. and Paul S. K., “Development of a CNC Interpolation Scheme for CNC Controller Based on Runge-Kutta Method”, International Journal of Computer Aided Engineering and Technology,Vol. 4(5), pp. 445-464, 2012.

Parvez M. S., Allama M. M., Ali S. M., and Azeem A., “An Analytical Hierarchical Process for Prioritizing the Safety Management Elements for a Manufacturing Organization in Bangladesh”, International Journal of the Analytic Hierarchy Process, Vol. 4(2), pp. 104-117, 2012.

Hossain M. S. J. and Ahmad N., “Surface Roughness Prediction Model for Ball End Milling Operation Using Artificial Intelligence”, Journal of Management Science and Engineering, 2012, Vol. 6, No. 2, 2012, pp.41-54

Hossain M. S. J. and Ahmad N,, “Surface Roughness Prediction Modeling for AlSl 4340 after Ball End Mill Operation using Artificial Intelligence”, International Journal of Scientific & Engineering Research, Volume 3, lssue 5, May 2012

Hossain M. S. J. and Ahmad N., “Adaptive Neuro-Fuzzy Inference System (ANFIS) Based Surface Roughness Prediction Model for Ball End Milling Operation”, Journal of Mechanical Engineering Research, Vol.4(3), pp. 112-129, March 2012 Page 14 of 17 

Haque A. and Ahmad N., “Crashing Axiom Artis Installation Project by Linear Programming”, Bangladesh Research Publication Journal, Vol.6, No.4, 2012, pp.356-362

Islam S. M., Rahman Z. B. and Ahmad N. “Designing Solar Three-Wheeler for Disable People”, International Journal of Scientific & Engineering Research, Vol. 3, No. 1, January-2012

Hossain M. S. J. and Ahmad N., “Artificial Intelligence Based Surface Roughness Prediction Modeling for Three Dimensional End Milling”, International Journal of Advanced Science and Technology, Accepted for publication in Vol.45, 2012

Khan K. A., Noor A., Hossain M. S. J. and Ahmad N., “Fuzzy Based Inventory Management System”, Bangladesh Research Publication Journal, Vol.7, No.1, 2012, pp.55-59

F. Sarwar, V. Marinov, “Reliability of Embedded Ultra-thin Chips Subjected to Cyclic Stresses”, Journal of Microelectronics and Electronic Packaging, 2012.

T. Yesmin, and Dr. M. A. A. Hasin, “Determination of Optimal
Ordering Quantity and Reduction of Bullwhip Effect in a Multistage Supply Chain Using Genetic Algorithm”, International Journal of Integrated Supply Management, Vol. 7, No. 4,   2012

Parveen S. and Saha S.K., “GA Based Multi-Objective Time-Cost Optimization in a Project with Resources Consideration”, International Journal of Modern Engineering Research, Vol.2, Issue.6, pp-4352-4359 , Nov-Dec. 2012.

Parveen S., “Multi-Criteria Optimization in Logistical Distribution in a Supply Chain”, International Journal of Emerging trends in Engineering and Development, Vol.7, Issue.2, pp-309-318, Nov. 2012
.
Gosavi A., Murray S,  Hu J., and Ghosh S., “Model-building adaptive critics for semi-Markov control”,  Journal of Artificial Intelligence and Soft Computing Research, Vol 2(2), 2012.

Sarwar F. and Marinov V., “Reliability of Embedded Ultra-thin Chips Subjected to Cyclic Stresses”, Journal of Microelectronics and Electronic Packaging, 2012.

Chowdhury N. T., Kamruzzaman M. and Dhar N.R., “Experimental Study on Hard Turning of Hardened Medium Carbon Steel with Carbide Insert under High-Pressure Coolant Condition”, International Journal of Machining & Machinability of Materials (IJMMM),Vol.12(1/2), pp.66-75, 2012

Mamun A.A. and Dhar N.R., “Numerical Modeling of Surface Roughness in Grinding under Minimum Quantity Lubricants (MQL) using Response Surface Method (RSM)”, Global Journal of Researches in Engineering ,Vol.XII(V), pp.21-31,2012.

Parveen S. and Hasin M. A. A., “Optimization of a Multi-Objective Scheduling Problem on a Single Machine with a Modified Pareto-Optimal Algorithm – A Case Study”, International Journal of Emerging trends in Engineering and Development, Vol.5, Issue.2, pp-1-12, July 2012.

Nawrin Jahan, and S. Parveen, A Heuristic Solution of a Sequencing Model using Versatile Johnson’s Rule in a Manufacturing Industry of Battery, International Journal of Engineering and Social Science (IJESS), Vol. 2, Issue 6, pp. 28-39, June 2012.

F. Sarwar, V. Marinov, Reliability of Embedded Ultra-thin Chips Subjected to Cyclic Stresses, Journal of Microelectronics and Electronic Packaging, 2012

V. Marinov, O. Swenson, R. Miller, F. Sarwar, Y. Atanasov, M. Semler, S. Datta, Laser-Enabled Advanced Packaging of Ultrathin Bare Dice in Flexible Substrates, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.2 (4),pp. 569-577, 2012

V. Marinov, O. Swenson, R. Miller, F. Sarwar, Y. Atanasov, M. Semler, S. Datta, “Laser-Enabled Advanced Packaging of Ultrathin Bare Dice in Flexible Substrates”, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.2 (4),pp. 569-577, 2012

Masud A.K.M. and Tahreen N., “Investigation of the mechanical properties of polyethylene/carbon nanotube composite by molecular dynamics simulation”, Int. J. Nano and Biomaterials, Vol. 4, No. 1, pp 54-68, 2012.

Masud A.K.M. and  Tahreen N., “Investigation A molecular dynamics study of the variations in the elastic properties of single-walled carbon nanotubes with tube radius, length and chirality”, Int. J. Nano and Biomaterials, Vol. 4, No. 1, pp 21-32,2012.

Tahreen N., Masud A.K.M.  , Int. J. Nano and Biomaterials, Vol. 4, No. 1, 2012, “A Molecular Dynamics Study of the Variations in the Elastic Properties of Single-walled Carbon Nanotubes with Tube Radius, Length and Chirality”

Tahreen N., Masud A.K.M.  , Int. J. Nano and Biomaterials, Vol. 4, No. 1, 2012,  “Investigation of the Mechanical Properties of Polyethylene/Carbon Nanotube Composite  by Molecular Dynamics Simulation”

Marinov V., Swenson O., Miller R., Sarwar F., Atanasov Y., Semler M. and  Datta S., “Laser-Enabled Advanced Packaging of Ultrathin Bare Dice in Flexible Substrates”, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol.2 (4),pp. 569-577,2012.

2011

Ali, S.M., Dhar, N.R., & Dey, S.K., “Effect of Minimum Quantity Lubrication (MQL) on cutting performance in turning medium carbon steel by uncoated carbide insert at different speed-feed combinations”, Advances in Production and Management, vol. 6, no.3. pp. 185-196, 2011.

Ali, S.M., Paul, S.K., A. Kamrul, & Azeem, A., “Forecasting   of  optimum raw material inventory level  using an artificial neural network”, International Journal of Operations and Quantitative Management, vol.17, no.4, pp. 333-348, 2011.

Farhana, Z., Ali, S.M., & Rahman, M.M., “Investigation on workplace environment and Safety- a case study in Rahimafrooz Batteries Ltd.”, International Journal of Quality and Innovation, vol. 1, no.4, pp. 338-347, 2011.

Zaman, K, McDonald, M and Mahadevan, S, Probabilistic Framework for Uncertainty Propagation with both Probabilistic and Interval Variables, ASME Journal of Mechanical Design 2011, 133(2):0210101–02101014.

Zaman, K, McDonald, M, Mahadevan, S, and Green, L, Robustness-based design optimization under data uncertainty, Structural and Multidisciplinary Optimization, Volume 44 Issue 2, August 2011 Pages 183-197.

S. Parveen, and M.A.A. Hasin, “A Heuristic Solution of Multi-item Single Level Capacitated Dynamic Lot-Sizing Problem with Setup Time”, International Journal of Advanced Materials Research, Published by Trans. Tech. Publications, Switzerland, Vols. 264-265, pp. 1794-1801, June 2011.

Ahmed M. and Ahmad N., “An Application of Pareto Analysis and Cause-and-Effect Diagram (CED) for Minimizing Rejection of Raw Materials in Lamp Production Process”, Journal of Management Science and Engineering, Vol.5, No. 3, 2011, pp. 87-95.

Mahmud and Ahmad N., “Study the Impact of Fatigue and Optimizing Productivity of an Assembly Line of Garment Industry”, International Journal of Scientific & Engineering Research, Vol.2, No. 11, 2011, pp. 1-8.

M.A.A. Hasin, S. Ghosh, M.A. Shareef, “An ANN Approach to Demand Forecasting in Retail Trade in Bangladesh.” International Journal of Trade, Economics and Finance. Vol 2(2), April, 2011.

Nijhoom F. M. and Azeem A., “A QFD Based Approach for Product Design: Combination of Consumer Needs and Design Decisions”, i-manager’s Journal on Mechanical Engineering,Vol. 1(3), pp. 9-16, 2011.

Rashed C. A. A. and Azeem A., “Effect of Information and Knowledge Sharing on Supply Chain Performance: A Case Study”, Journal of Operations and Supply Chain Management, Vol. 3(2), pp. 61-77, 2011.

Paul S. K. and Azeem A., “An Artificial Neural Network Model for Optimization of Finished Goods Inventory”, International Journal of Industrial Engineering Computations, Vol. 2, pp. 431-438, 2011.

Ali. S. M., Paul S. K., Ahsan K. and Azeem A., “Optimization of Raw Material Inventory Using an Artificial Neural Network”, International Journal of Operational and Quantitative Management,Vol. 17(4), pp. 333-348, 2011.

Ali. S. M., Paul, S. K., Ahsan, K. and Azeem, A., “Optimization of Raw Material Inventory Using an Artificial Neural Network (ANN)”, Accepted, International Journal of Operational and Quantitative Management, 2011.

Rashed, C. A. A. and Azeem, A., “Effect of Information and Knowledge Sharing on Supply Chain Performance: A Case Study”, Journal of Operations and Supply Chain Management, Vol. 3(2), pp. 61-77, 2011.

Paul, S. K. and Azeem, A., “An Artificial Neural Network Model for Optimization of Finished Goods Inventory”, International Journal of Industrial Engineering Computations, Vol. 2, pp. 431-438, 2011.

F. Sarwar, Z. Chen, J. Wu, D. C. Webster, V. Marinov, Laser Ablation of A Photoresist Containing a Novel Gas Carrier Sensitizer, Journal of Microelectronics and Electronic Packaging, vol.8, p.66, 2011

T.Yesmin, M. Masuduzzaman and A. Zaher, “Productivity Improvement in Plastic
Bag Manufacturing through Lean Manufacturing Concepts: A case study”, Applied Mechanics and Materials, vol. 110-116, pp. 1975-1982, 2011.

Zaman, K, McDonald, M, Rangavajhala, S and Mahadevan, S, Reliability Analysis with Probabilistic and Interval Variables, In Proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP11), August 1-4, 2011, ETH Zurich, Switzerland.

Zaman, K, and Mahadevan, S, Design Optimization under Data Uncertainty, The 9th World Congress on Structural and Multidisciplinary Optimization, 13-17 June, 2011, Shizuoka, Japan.

Masud, A.A., Ali, S.M., & Dhar, N.R., "Modeling of chip-tool interface temperature in machining steel- an Artificial Intelligence (AI) approach", International Conference on Industrial Engineering and operations Management –IEOM, Malaysia , pp. 638-643, 2011.

Hossain, M.S.J., Ahmad, N., Green design principles and trends of using them among Bangladeshi consumer goods manufacturers, IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2011.

Nusrat T. Chowdhury and N. R. Dhar, “Experimental Analysis and Modeling of Tool Wear and Surface Roughness in Hard Turning under Minimum Quantity Lubricant Environment”, Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management (IEOM 2011), Kuala Lumpur, Malaysia, January 22–24, 2011, pp. 326 – 330.

Nusrat T. Chowdhury and N. R. Dhar, “Optimization of Cutting Parameters in Near Dry Machining of Hardened Steel”, Proceedings  of the International Conference on Computational Methods in Manufacturing (ICCMM 2011) Guwahati, Assam, India, December 15-16, 2011, pp. 296 - 304.

Hossain M.S.J. and Ahmad N., “Green Design Principles and Trends of Using Them among Bangladeshi Consumer Goods Manufacturers”, Proceedings of the 2011 IEEM, Singapore, 2011, pp. 467-471.

2010

Ahmed, T., Ali, S.M., Allama, M.M., & Parvez, M.S., “A Total Productive Maintenance (TPM) approach to improve production efficiency and development of loss structure in a Pharmaceutical Industry”, Global Journal of Management and Business Research, vol. 10, no. 2, pp.186-190, 2010.

Ahsan M.K. and Azeem A., “Insights of Apparel Supply Chain Operations: A Case Study”, International Journal of Integrated Supply Chain Management, Vol. 5(4), pp. 322-343, 2010.

Ahsan M.K. and Azeem A., “Operational Performance Analysis of a Public Hospital Laboratory”, International Journal of Information Systems in the Service Sector, Vol. 2(4), pp. 22-38, 2010.

Sultana I, Azeem A. and Dhar N. R., "Effect of Minimum Quantity Lubrication (MQL) on Cutting Temperature, Chip, Cutting Forces, Tool Wear and Surface Roughness in Hard Turning”, International Journal of Advances in Machining and Forming Operations, Vol. 2(1), pp. 55-69, 2010

Paul S. K. and Azeem A., “Minimization of Work In Process Inventory in Hybrid Flow Shop Scheduling Using Fuzzy Logic”, International Journal of Industrial Engineering, Vol. 17(2), pp. 115-127, 2010.

Paul S. K. and Azeem A., “Selection of the Optimal Number of Shifts in Fuzzy Environment: Manufacturing Company’s Facility Application”, Journal of Industrial Engineering and Management, Vol. 3(1), pp. 54-67, 2010.

Azeem A., “Selection of Efficient Cut Pattern for Simple Pocket Machining in Traditional Milling”, Journal of Manufacturing Engineering, Vol. 5(1), pp. 23-30, 2010.

S. Parveen, and H. Ullah, “Review on Job-Shop and Flow-Shop Scheduling using Multi Criteria Decision Making”, Journal of Mechanical Engineering, IEB, Bangladesh, Vol. ME 41, No. 2, pp. 130-146, December 2010.

H. Ullah, and S. Parveen, “A Literature Review on Inventory Lot Sizing Problems”, Global Journal of Researches in Engineering (GJRE), Vol. 10, Issue 5, pp. 21-36, October 2010.

 Amin M.I, Murad M.A.U. and Ahmad N., “Analysis of Critical Success Factors of Enterprise Resource Planning Implementation in Bangladesh”, Journal of Business Administration, Vol.36, No.1-2, 2010, pp. 25-42.

Ahsan, M.K. and Azeem, A., “Insights of apparel supply chain operations: a case study”, International Journal of Integrated Supply Chain Management, Vol. 5(4), pp. 322-343, 2010.

Ahsan, M.K. and Azeem, A., “Operational Performance Analysis of a Public Hospital Laboratory”, International Journal of Information Systems in the Service Sector, Vol. 2(4), pp. 22-38, 2010.

Sultana, I, Azeem, A. and Dhar, N. R., "Effect of Minimum Quantity Lubrication (MQL) on Cutting Temperature, Chip, Cutting Forces, Tool Wear and Surface Roughness in Hard Turning”, International Journal of Advances in Machining and Forming Operations, Vol. 2(1), pp. 55-69, 2010.

Paul, S. K. and Azeem, A., “Minimization of Work In Process Inventory in Hybrid Flow Shop Scheduling Using Fuzzy Logic”, International Journal of Industrial Engineering, Vol. 17(2), pp. 115-127, 2010.

Paul, S. K. and Azeem, A., “Selection of the Optimal Number of Shifts in Fuzzy Environment: Manufacturing Company’s Facility Application”, Journal of Industrial Engineering and Management, Vol. 3(1), pp. 54-67, 2010.

Azeem, A., “Selection of Efficient Cut Pattern for Simple Pocket Machining In Traditional Milling”, Journal of Manufacturing Engineering, Vol. 5(1), pp. 23-30, 2010.

Prianka B. Zaman, S. K. Dey and N. R. Dhar, “Turning Hardened Steel using Carbide Insert under High-Pressure Coolant Condition”, International Journal of Machining and Forming Technologies, Vol. 4(3/4), pp. 215-230, 2010.

Zaman, K, McDonald, M, Rangavajhala, S and Mahadevan, S, Representation and Propagation of both Probabilistic and Interval Uncertainty, In Proceedings of the 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 12-15 April, 2010, Orlando, Florida, Paper number AIAA 2010-2853.

Zaman, K, McDonald, M, Rangavajhala, S and Mahadevan, S, Robustness-based design optimization with sparse point and interval data, In Proceedings of the 13th AIAA/ISSMO Multidisciplinary Analysis Optimization Conference, 13 - 15 Sep 2010, Fort Worth, Texas, Paper number AIAA 2010-9035.

Ali, S.M., & Dhar, N.R., Tool wear and surface roughness prediction using an artificial neural network in turning steel under minimum quantity lubrication, International Conference on Industrial Engineering-ICIE-2010, WASET Conference Proceedings, Malaysia, vol. 62, no. 4,  pp. 607-616, 2010.

Mamun, A.A.,  Ali, S.M & Dhar, N.R., "Tool wear prediction in turning steel under minimum quantityl  lubrication using response surface methodology and adaptive neuro-fuzzy inference system", The 3rd International Conference on Structure, Processing and Properties of Materials-SPPM, Dhaka 2010.

Prianka B. Zaman and N. R. Dhar, “Predictive Modeling of Cutting Temperature and Force in Machining Steel under High Pressure Coolant (HPC) Condition”, Proceedings of CIPE 2010, 2nd International Conference on Production and Industrial Engineering, December, 2010, India.

Nusrat T. Chowdhury, M. Kamruzzaman and N. R. Dhar, “Experimental Study on Hard Turning of Hardened Medium Carbon Steel with Carbide Insert under High-Pressure Coolant Condition”, 2nd International Conference on Production and Industrial Engineering (CPIE-2010), Jalandhar, India, December 3-5, 2010, pp. 568 – 573.

F. Sarwar, B. Scholz, W. Lim, S. Ahmad, A. Reinholz, Fabrication of  Tall Structures for Microelectronics Application Using Selective Electrodeposition Process, , North Dakota State University, IMAPS 2010, 43rd International Symposium on Microelectronics, October 31 - November 4, 2010

N. Tarin Chowdhury, S. Shahnawaz and N. R. Dhar, “Experimental Study on the Behavior of Minimum Quantity Lubricant Technique when Turning Hardened Steel using Coated Carbide Insert”, Proc. of the 25th National Convention of Production Engineers’ and National Seminar on “Recent Developments in Manufacturing Technology” Agartala, Tripura, India, 2010, pp. 73 – 79.

2009

A.K.M. Masud, S. C. Chowdhury, Abdullah-Al-Khaled and S. Jannat, Study of the Effective Young's Modulus of Carbon Nanotube-Based Polymer Composites Using Finite Element Method, International Journal of Manufacturing Science and Technology (IJMS&T) , Serials Publications, 2009, Accepted .

A. A. Khaled, A. K. M. Masud, S.C. Chowdhury S. Jannat and M. Obayedullah, Effect of Fiber Diameter Waviness and Wavelength Ratio on the Effective Tensile Elastic Modulus of Carbon Nanotube-based Polymer Composites, Advanced Materials Research (AMR) , trans tech publications inc., 2009, Accepted.

Farhana Abedin, A. K. M. Masud, Abdullah Al Khaled and Md. Rajib Anwar, Study of the effect on tensile elastic modulus of carbon nanotube-based polymer composite due to changes in carbon nanotube diameter and interphase thickness using finite element method, International Journal of Materials Sciences and Engineering (IJMSE) , 2009, in press.

A. K. M. Masud, Md. Kamal Miah, Abdullah-Al-Khaled and Farhana Abedin Effect of Orientation of Glass Fiber Mat-Epoxy Composite on Mechanical Properties, Journal of Manufacturing Engineering , Vol.4, Issue.1, 2009 (in press).

K. M. Masud, Md. Khan Habibur Rahman and Md. Kamal Miah, Performance of Modified Uncoated Tungsten Carbide Insert, Journal of Engineering and Applied Science (JEAS) Vol. 27 No. 2, 2009 (in press) .

A.K.M. Masud, Nabila Tahreen and Farhana Abedin, Effects of Interphase and Matrix Properties on the Effective Tensile Elastic Modulus of Carbon Nanotube-Based Composite, Journal of Mechanical Engineering , Vol. ME 40, No. 1, pp. 29-38, 2009, Accepted.

Bhattacharjee, B. and Azeem, A., “Development of an Improved CNC Interpolator and Performance Evaluation in terms of Chordal Error and Feedrate Deviation”, International Journal of Quality and Innovation, InderScience, 1(1), 83-96, 2009.

Sultana, F., Razive, N. I. and Azeem, A., “Implementation of Statistical Process Control (SPC) for Manufacturing Performance Improvement”, Journal of Mechanical Engineering, 40(1), pp. 15-21,2009.

K. M. Masud, Abdullah-Al-Khaled, Farhana Abedin, A.F.M. Nasir Uddin and M. Sayeed Alam, Quality Control by Information Technology in RMG industry in Bangladesh, International Journal of Quality & Innovation (IJQI) , InderScience Publisher, 2009, (in press).

McDonald, M., Zaman, K., Mahadevan, S., Representation and First-Order Approximations for Propagation of Aleatory and Distribution Parameter Uncertainty,  In Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4 - 7 May, 2009 Palm Springs, California, Paper number AIAA-2009-2250.

Zaman, K, McDonald, M, Rangavajhala, S and Mahadevan, S, Representation, Aggregation and Propagation of Aleatory and Epistemic Uncertainty in Probabilistic Framework, The 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, June 24-27, 2009, Blacksburg, VA.

Murad, M. A. U., Ahmad, N., Analysis of Critical Success Factors of Enterprise Resource Planning Implementation in Bangladesh, International Research Conference on Management and Finance, Sri Lanka, 11 December 2009.

Jamil, R. M., Ahmad, N., Present Status and Critical Success Factors of  E-Commerce in Bangladesh, CD proceeding of 12th International Conference on Computer and Information Technology (ICCTIT), Paper ID 354, Dhaka, 21-23 December 2009.

Ahmad, N., Tanaka, T. and Saito, Y., Optimization of  Multipass Turning Parameters by Genetic Algorithm, CD Proceeding of International Conference on Advances in Materials and Processing Technologies, Kuala Lumpur, Malaysia, Paper ID 849, pp. 195 (Abstract), 26-29 October, 2009.

S. Parveen, and M.A.A. Hasin, Multi-Item Capacity Constrained Dynamic Lot-Sizing and Sequencing with Setup Time, Journal of Mechanical Engineering, IEB, Bangladesh, Vol. ME 40, No. 2, pp. 110-118, December 2009.

Paul, S. K. and Azeem, A., Defects Identification and Analysis of a Pharmaceutical Product using Pareto and Cause-Effect Analysis, Proceedings of the 8th International Conference on Mechanical Engineering, Dhaka, Bangladesh, pp. RT-23-1-6, 2009.

2008

Ali, S. M., Sarwar, M.A., & Sultana, A., “Finding characteristics of Process Capability Index, Cpk with different distributions and sample sizes”, Journal of Quality and Technology Management, vol. IV, no. 2, pp. 5-11, 2008.

A. A. Khaled, A. K. M. Masud, S.C. Chowdhury S. Jannat and M. Obayedullah, Effect of Fiber Diameter Waviness and Wavelength Ratio on the Effective Tensile Elastic Modulus of Carbon Nanotube-based Polymer Composites, The International Conference on Advances in Materials and Processing Technologies (AMPT 2008), Book of Abstracts, pp. 57-58, November 2008.

Ahammed, F. and Azeem, A., Application of AHP Model for Selecting the Most Appropriate Package of Solar Home System in Bangladesh, Proceedings of International Conference on Recent Development in Statistical Sciences, Dhaka, Bangladesh, pp. 353-360, 2008.

Ahsan, K. and Azeem, A., A Study of Supply Chain Sustainability in Apparel Sector, Proceedings of the 3rd World Conference on Production and Operations Management, POM TOKYO, Japan, pp. 1787-1798, 2008.

N. R. Dhar, Prianka B. Zaman, I. Sultana, S. K. Dey, “Experimantal Study on Hard Turning of Hardened Medium Carbon Steel with Uncoated Carbide Insert Under MQL Condition”, Proceedings of 2 nd International Conference on Advanced Tribology, pp 425-427, 2008.

2007

A.K. M. Masud, A. K. M. Kais Bin Zaman and Abdullah-Al-Khaled, Effect of Environment on Fracture Toughness of Glass Fiber/Polyester Composite, Journal of Mechanical Engineering , Vol. ME 38, pp. 38-44, December 2007.

K. M. Masud, Abdullah-Al-Khaled, Seratun Jannat, A. K. M. Sajedul Arefin Khan and Kingshuk Jubaer Islam, Total Productive Maintenance in RMG Sector, A Case: Burlingtons Limited, Bangladesh, Journal of the Institution of Engineers, Bangladesh, Multidisciplinary , Vol. Mul-dis. 32, No. 1, pp. 11-18, December 2007.

A. K. M. Masud, S. C. Chowdhury and Abdullah-Al-Khaled, Investigation of Fiber Diameter and Interphase Effects on the Tensile Elastic Modulus of Carbon Nanotube Reinforced Composite, Proceedings of the International Conference on Mechanical Engineering (ICME2007), pp. AM-75, December 2007.

B. R. Sarker, J. Yu, D. Mungan, M. A. A. Rahman, and S. Parveen , Pareto-Optimal Solution of a Scheduling Problem on a Single Machine with Periodic Maintenance and Non- Pre-Emptive Jobs, Proceedings of the International Conference on Mechanical Engineering 2007 (ICME2007), pp. 1- 5.

2006

Teng, Z., Feng, H.-Y. and Azeem, A., “Generation of efficient tool paths by machining area segmentation from massive data points”, International Journal of Advanced Manufacturing Technology, 30, 254-260, 2006.

Ahmad, N., Tanaka, T. and Saito, Y., Cutting Parameters Optimization and Constraints Investigation for Turning Process by GA with Self-Organizing Adaptive Penalty Strategy, JSME International Journal Series C: Mechanical Systems, Machine Elements and Manufacturing, Vol.49, No.2, June 2006, pp.293-300.

Ahmad, N., Zhu, J., N., Nakamoto, H. and Matsuhira, N., Self-Localization of Home Robot ApriAttenda Based on Monte Carlo Approach, Proceeding of International Symposium on Practical Cognitive Agents and Robots, Perth, Australia, pp.212-220, Nov.27-28 2006.

Zhu, J., Ahmad, N., Nakamoto, H. and Matsuhira, N., Feature Map Building Based on Shape Similarity for Home Robot ApriAttenda, 2006 IEEE International Conference on Robotics and Biomimetics, ROBIO2006, Kunming, China , December 17~20, 2006, No. 06-4, pp.1030-1035.

Ahmad, N., Tanaka, T. and Saito, Y., Optimization of  End Milling Operation by Genetic Algorithm Based on Self Organizing Adaptive Penalty Strategy, CD Proceeding of 12th Asia Pacific Management Conference, pp. 1293-1299, 2006.
Ahmad, N., Wakabayashi, R., Tanaka, T. and Saito, Y., Experimental Analysis and Optimization of Cutting Parameters for End Milling Alluminium Alloy, Proceeding of the 11th International Conference on Precision Engineering, Tokyo, Japan, Aug.16-18 2006, pp.347-348.

Zhu, J., Ahmad, N., Nakamoto, H. and Matsuhira, N., Map Building and Localization of Home Robot using Feature Matching and Monte Carlo Approach, CD Proceeding of JSME Conference of Robotics and Mechatronics ROBOMEC2006, Tokyo, Japan, May-26-28, 2006, No. 06-4, 1A1-E32.

2005

Azeem, A., Feng, H.-Y. and Orban, P., “Processing of noisy cutting force data for determining empirical parameters of a ball-end milling force model”, Measurement, 38(2), 113-123, 2005.

Ahmad, N., Tanaka, T. and Saito, Y., Optimization of cutting parameters for milling operation by Genetic Algorithm based on Self-Organizing Adaptive Penalty Strategy, Proceeding of the International Conference on Mechanical Engineering ICME-2005, Dhaka, Bangladesh, Dec.27-29 2005, No.05-204, ICME05-AM-08.

Ahmad, N., Tanaka, T. and Saito, Y., Investigation of the Constraints for Optimization of Turning Process by GA with Self-Organizing Adaptive Penalty Strategy, Proceeding of the 3rd International Conference on Leading Edge Manufacturing LEM-21, Nagoya, Japan, Oct.19-22, 2005, No.05-204, pp.319-324.

2004

Azeem, A., Feng, H.-Y. and Wang, L., “Simplified and efficient calibration of a mechanistic cutting force model for ball-end milling”, International Journal of Machine Tools and Manufacture, 44, 291-298, 2004.

Ahmad, N., Tanaka, T. and Saito, Y., Optimization of Turning Process Parameters by Genetic Algorithm (GA) Considering the Effect of Tool Wear, Proceeding of the 5th Manufacturing and Machine Tool conference, Osaka, Japan, 2004, No. 04-3, pp.305-306.

2003

Azeem, A., Feng, H.-Y. and Wang, L., A simplified approach for determining empirical cutting force coefficients for ball-end milling, Proceedings of the 31st North American Manufacturing Research Conference, Hamilton, Ontario, Canada, pp. 121-128, 2003.

2002

Ahmad, N. and Haque, A.F.M.A., Artificial neural network based process selection for cylindrical surface machining, Proceeding of the International Conference on Manufacturing, Dhaka, Bangladesh, 2002, pp.321-326.

1999

Nagarur, N. and Azeem, A., “Impact of commonality and flexibility on manufacturing performance - a simulation study”, International Journal of Production Economics, 60-61, 125-134, 1999.

1997

Nagarur, N. and Azeem, A., Impact of commonality on manufacturing performance - a imulation study, Proceedings of the 14th International Conference on Production Research, Osaka, Japan, p. 246-249, 1997.

 

 
 
     
 
BUET Home  | Webmail |  BIIS   |  Central library

Bangladesh University of Engineering & Technology